Products
Factory source Water Reducing Admixtures In Concrete - Oil demolding agent – Xiangye
Factory source Water Reducing Admixtures In Concrete - Oil demolding agent – Xiangye Detail:
Usage Method
Dilution method: transfer the water to the desired concentration, and please stir well. The is diluted with clean water and sprayed on the surface of the mold. The specific dilution ratio of should be selected according to the difficulty of release molding of silicone products. Even the amount of release agent sprayed in the process of use will not cause bad appearance phenomena such as whitening, crack, watermark, oil and other surface of the product after forming oil release agent use method is simple, brush up directly, pouring concrete can be
Common problems encountered during the use of the mold release agent
1. Ineven injection- – - – - – - – - – - – - – - -improved coating
2. Spray flow- – - – - – -adjust the spraying amount
3. Wipe- – - – - – - – - – - – -select release agent hardness and solvent system
4. Evaporation- – - – - – - – - – - – - – -solid separation solubility or solvent solubility is different, orange peel phenomenon, evaporation when the solid precipitation can not form a uniform skin film, adjust the dispersant and solvent
5. Product shrinkage- – - – -shrinkage stress exceeds tension resistance, concentric marks, mainly choose material shrinkage, injection pressure and other adjustments
6. Bubble- – - – - – - – - – - -the product surface has many small bubble pits, raw material problems or release agent foaming performance, the gap between the release agent and mold into the air or the mold surface is rough, improve the hardness of release agent
7. Heat capacity of mold material- – - -mold reinforcing material heat capacity distribution is different, different heat storage, high temperature reaction is fast, or high temperature dissolution of mold release agent caused
Product detail pictures:
Related Product Guide:
The corporation upholds the philosophy of "Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth", will proceed to provide aged and new buyers from home and abroad whole-heatedly for Factory source Water Reducing Admixtures In Concrete - Oil demolding agent – Xiangye , The product will supply to all over the world, such as: Puerto Rico, San Francisco, European, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
By Jocelyn from Irish - 2018.06.28 19:27
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Kristin from Lithuania - 2018.11.28 16:25
