Wholesale Fast delivery Pp Biaxial Geogrid - Oil demolding agent – Xiangye Manufacturer and Supplier

Fast delivery Pp Biaxial Geogrid - Oil demolding agent – Xiangye

Short Description:

Product Detail

Product Tags

Feedback (2)

We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Non Ionic Surface Active Agent , Concrete Mould Release Oil , Mineral And Chemical Admixtures , Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.

Fast delivery Pp Biaxial Geogrid - Oil demolding agent – Xiangye Detail:

Usage Method

Dilution method: transfer the water to the desired concentration, and please stir well. The is diluted with clean water and sprayed on the surface of the mold. The specific dilution ratio of should be selected according to the difficulty of release molding of silicone products. Even the amount of release agent sprayed in the process of use will not cause bad appearance phenomena such as whitening, crack, watermark, oil and other surface of the product after forming oil release agent use method is simple, brush up directly, pouring concrete can be

Common problems encountered during the use of the mold release agent

1. Ineven injection- – - – - – - – - – - – - – - -improved coating

2. Spray flow- – - – - – -adjust the spraying amount

3. Wipe- – - – - – - – - – - – -select release agent hardness and solvent system

4. Evaporation- – - – - – - – - – - – - – -solid separation solubility or solvent solubility is different, orange peel phenomenon, evaporation when the solid precipitation can not form a uniform skin film, adjust the dispersant and solvent

5. Product shrinkage- – - – -shrinkage stress exceeds tension resistance, concentric marks, mainly choose material shrinkage, injection pressure and other adjustments

6. Bubble- – - – - – - – - – - -the product surface has many small bubble pits, raw material problems or release agent foaming performance, the gap between the release agent and mold into the air or the mold surface is rough, improve the hardness of release agent

7. Heat capacity of mold material- – - -mold reinforcing material heat capacity distribution is different, different heat storage, high temperature reaction is fast, or high temperature dissolution of mold release agent caused

Product detail pictures:

Related Product Guide:

We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Fast delivery Pp Biaxial Geogrid - Oil demolding agent – Xiangye , The product will supply to all over the world, such as: Germany, Swedish, Belgium, We always hold on the company's principle "honest, professional, effective and innovation", and missions of: let all drivers enjoy their driving at night, let our employees can realize their value of life, and to be stronger and service more people. We are determined to become the integrator of our product market and one-stop service provider of our product market.

Chemical Admixtures Used In Concrete